SEA-LINE® S2 polishing paste is universal for all types of finishing coatings. Prevents defects after polishing and ensures an excellent mirror shine finish.
SEA-LINE® S2 EXTRA SHINE HOLOGRAM REMOVER can be used by both professionals and DIYers as a finishing product in the polishing process. With S2, we will get a higher surface gloss and remove holograms.
Surface preparation:
- Wash the surface using Sea-Line S3 FINISH CLEANER SHINE CONTROL.
- If it is necessary to remove defects from the surface, sand it and finish sanding with a minimum gradation of P3000.
- Remove dust after sanding.
- Wash the surface again using S3.
Polishing:
- Apply finishing paste S2 to the surface or applicator.
- Start polishing at the lowest rotation speed (800-1000 rpm) until the paste starts to change colour.
- Slowly increase the rotation speed to a maximum of 2000 rpm.
- Polish until all defects are removed and a full gloss is achieved.
- Remove dust and any residue left after the polishing process using S3 FINISH CLEANER.
- If necessary, repeat the polishing process.
To protect the surface, it is recommended to use:
- Sea-Line® S4 WAX
- Sea-Line® S5 QUICK WAX
For daily maintenance, use:
- Sea-Line C3 SHAMPOO WITH WAX
Packaging: 500 ml
